*LBL* Layer By Layer Method Tutorial(For Beginners)

[shadowhawk]

1. cross tutorial that i've made...first put all the cross edges at last layer before dropping them at the 1st layer...meant for those that wants to start learning to solve a cube..can use to teach ppl at workshop...my way of doing cross beginner-ly...

http://www.youtube.com/watch?v=jvOHaRmk7AM&fmt=18

2. next step on solving the cube...this is the tutorial on how to insert the corners for 1st layer to complete 1st layer...
had problems sometimes aligning the colours lolz..cuz got light reflection make the red sometimes look orange...

http://www.youtube.com/watch?v=zodTWaUX1kw&fmt=18

3. after the 1st layer is done...the next step is to solve the edges of the 2nd layer....
this tutorial teaches how to recognise the edges that belongs to 2nd layer, how to align them and how to insert them to the 2nd layer...
following is the link to my 2nd layer edge tutorial...enjoy...

http://www.youtube.com/watch?v=OuixB9znEt0&fmt=18

*UPDATE*
4. after finishing 1st 2 layers...the last is to finish up the last layer....
this tutorial teaches to use 5look last layer to finish the last layer. It will touch on doing orientation of last layer(OLL) using sunes/fish, permutate corners(using A perm) and finally permutate the edges(using U perm) to complete the cube....enjoy...

due to the length of the video being too long, the video has been spilt into 2 parts...sry for the inconvinence

Part 1/2: http://www.youtube.com/watch?v=bbqqQqIjj24&fmt=18
Part 2/2: http://www.youtube.com/watch?v=t9RUrJScWzM&fmt=18


Youtube Playlist: http://www.youtube.com/view_play_list?p=E2E0C27A1793CE15

[Alpha]

not bad. easily explained. but you can try saying the colour of the edge (e.g. Blue/white) instead of "this edge"

[EdMoNd]

Hahas, I watched the video already. Quite good! =D I think most of the beginners out there will be able to understand =D But you really sounds a bit nervous. hehe =D

[durianana]

thx for sharing. hope this will help to improve my timing

[shadowhawk]

thx for sharing. hope this will help to improve my timing

this won't improve ur timing much unless u r still taking like 20sec+ for cross, it consist of alot of turns...but...can be done quickly without thinking much...

[durianana]

i see...so is there any tips for fast cross making?

[shadowhawk]

do it intuitively...

try doing ur cross blind for practise...memorise the steps to do the cross and do it blindly..normally u would make it as little turns as possible as it's easier to memorise..

[durianana]

ok thx.. i will try it out

[kaixax555]

cross tutorial that i've made...meant for those that wants to start learning to solve a cube..can use to teach ppl at workshop...my way of doing cross beginner-ly...

my 1st time doing tutorial...so pardon my very nervous voice and maybe some unclear info...anything can juz ask me here...enjoy...

http://www.youtube.com/watch?v=jvOHaRmk7AM&fmt=18

Lol better than mine. So less nervous. I very nervous when making video.

[shadowhawk]

haha..thx for the feedbacks and thanks for watching..i probably will be doing another tutorial on the next step which is slotting of the white corners...so stay tune...

[kaixax555]

haha..thx for the feedbacks and thanks for watching..i probably will be doing another tutorial on the next step which is slotting of the white corners...so stay tune...

Lol you should include inserting the edges too. That is part of the beginner F2L.

[shadowhawk]

haha...one step at a time lor

[shadowhawk]

*Updated*
Look at the 1st post for the link to my 1st layer corner tutorial....
hope you guys can understand...

any questions can post here...

[kaixax555]

Wow this tutorial is really good. I like it.

[DKD]

haha, it seems tat u r less nervous,judging frm the fact tat u sound louder n has less pauses in ur speech in the 2nd tutorial.

i lyk those tutorials,they r clear 2 understand. keep it up!(u could make a f2l tutorial as well )